Heavily modded Strat came through the door with some dead spots. The owner wanted the action super low so a fret level was in order. On inspection I found the fingerboard was not level but not only that the frets had lifted at the high end of the board and were very uneven everywhere else. I managed to stick the loose frets down and level and re-crown the frets to be even but to get this guitar perfect I would want to re-fret it and get the board level.
One of the neck screw holes had threaded so I plugged it a re-drilled.
I need to add a string tree as there wasn’t enough angle over the nut
